When everyone is at the height of summer and having a great time swimming, your pool should be in top condition. At the center of things is your pool pump because it impacts the entire pool system. So, how do you know if you need to call an electrician Brisbane to check your pool pump? It pays to be aware of the signs that your pump is in need of repair.
Signs to Pay Close Attention to
Water leaks. A pump that is leaking water could indicate a number of reasons such as a damaged O ring or faulty mechanical seal. If the unit is spraying out water, the seal is likely broken, which is causing the pressurized water to escape.
The pool pump has to be tightly sealed to the housing that comes with an O ring, for it to function properly. A lack of maintenance can cause this rubberized ring to wear out or break. Once the seal is broken, the pool pump will send the pressurized water in full force.
Strange sounds.If you hear grinding or screeching noises, your pool pump may need new bearings. Also, check if the pump has been dislodged, causing the motor to vibrate more than usual. In addition, if the pump is unable to get sufficient water, cavitation may occur. If your pump is suddenly making unusual noises, call an experienced electrician to take a look.
Air leaks.While pumps are typically airtight, they may start to leak over time. A pool pump that is sucking in the air is not a good sign. A few factors can cause these air leaks such as a broken O ring, an old or loose pump lid, faulty drain plugs, or bad thread sealant.
As air leaks become larger, this can bring about issues with the pool circulation and the overall performance of the pump itself. With this, it is important to find the source of the problem and apply the right solution.
Electrical malfunction. One of the causes of electrical failure with a pool pump is a loose connection. Voltage fluctuations, a blown fuse in the motor power board, or wiring problems may also prevent the pump from functioning correctly.
The motor wires, the motor disconnect switch, the circuit breaker, and the pump timer clock may also have electrical problems. Things can go wrong and cause an electrical failure to the pump if any of these parts are not getting the right voltage.
Old age. As with everything else, a pool pump that is getting older requires extra TLC. So, if you have an older pump, make sure it receives regular repair and maintenance service to help keep it running more efficiently.
If you have been using the same pool pump for more than 10 years, consider purchasing a new one, particularly if the system is frequently breaking down. You can consult with your local electrician if a replacement is necessary.
Why Leave the Repair and Installation to the Professionals
Pool pumps ensure proper circulation of water and chemical in the swimming pool. Considering that clean water is essential to the overall condition and safety of the pool, repairs and installations of pool equipment should be done meticulously.
Even though you are excited to enjoy your pool anytime you want, do not try to fix it by yourself if there is a problem with its operation, including the pool pump. Here are some reasons to leave the job to the professionals:
Complex processes.Many pool owners find it easy to repair minor problems with their pool. However, there are more complicated repairs that average owners cannot handle themselves. Pumps are part of the complex systems and chances are, you cannot find proper fixes by only watching online videos.
A professional electrician does not only tackle the structural and electrical aspects of the pool but is also familiar with pool water, including pH, cyanuric acid, alkalinity, safe water, etc. Chemical understanding allows them to spot issues before they get too serious. In general, it is better to trust the specialist with your pump, motor, control system failures, and electrical malfunction.
Safety concerns.A swimming pool repair typically involves electricity and water. A combination of the two can be harmful and fatal. You are likely not highly trained and well experienced to work on this kind of problem and environment.
Pool pumps, filters, lights, etc., are electrical devices that are submerged in water. It is extremely dangerous to deal with these pieces of equipment on your own.
Protect the investment.A pool is one of the biggest investments you can make in your life. With this, you may think you can save money by doing the repairs on your own. However, the constant DIY repairs and maintenance can eventually burn a hole in your pocket, particularly if you neglect other bigger problems. The last thing you want is to have more serious and costly problems.
The cost is the main reason why you should let a reliable electrician repair your pool pump. Learning how to fix this pool equipment requires skill and time. Trusting the expert with your pump is a smart decision you can make to protect your investment.
Peace of mind. Trusting a pool specialist is not only a cost-effective solution, but it will give you peace of mind. When a professional repairs your pool pump, rest assured it is done the right way. On the other hand, DIY repairs usually lead to a need for a second opinion, wasting money and time.
If an issue occurs during a professional service, the company will be responsible for the costs and damages, covering a huge amount of repairs. In other words, hiring professional contractors also bring peace of mind to your wallet.
Long-term impact.Shelling out some money now can sometimes help you save money down the road. For example, the professional service of a qualified electrician may cost you a specific amount of money, but it is definitely worth it if it can help maintain the original value of your pool. After all, the pump repair and installation services will keep your pool in great shape and protect your family as they prevent potential safety hazards from happening.
